miConverter S-Series

miConverter S-Series Ultra-Compact

Media Converters 

 

The miConverter S-Series of bridging Ethernet media converters are the smallest converters available. The ultra-compact S-Series is designed for mobile applications where light weight, compact size and low power are critical requirements. The S-series copper-to-fiber media converters are available with 100BASE-FX or 1000BASE-Xfixed fiber transceivers (SC or ST), or Small Form Pluggable (SFP) transceivers.

The miConverter S-Series media converters can be USB powered, enabling fiber connectivity to locations where AC or DC power is unavailable, such as field-deployed fiber-to-the-laptop and military applications. They are also available with country-specific AC/DC power adapters.

 

miConverter_S-Series.pdf
PDF-Dokument [557.5 KB]

miConverter GX/T is a miniature 10/100/1000BASE-T


The miConverter GX/T is a miniature 10/100/1000BASE-T copper to 1000BASE-X fiber media converter that supports jumbo frames.

The miConverter GX/T miniature Ethernet media converters provide cost-effective copper-to-fiber connectivity solutions. Due to their size, portability, and low power consumption, they are ideal for fiber-to-the-desktop/laptop under the desk deployments and mission-critical field diagnostic applications.

The miConverter GX/T features fixed fiber connectors and Small Form Pluggable (SFP) transceivers. ST, SC and LC fixed fiber connectors support multimode, single-mode, and single-mode single-fiber. 100BASE-X and 1000BASE-X SFP transceivers enable adaptability to different data rates, fiber types and wavelengths, including Coarse Wave Division Multiplexing (CWDM) wavelengths to increase the bandwidth capacity of fiber infrastructure.

 

miConverter_GX-T.pdf
PDF-Dokument [648.3 KB]

miConverter GX/T

10/100/1000Base-Tx UTP to 1000Base-Fx Fiber Ethernet Media Converter with SFP Transceivers, Fault Detection Tools and DIP-Switch Configuration

 

The miConverter GX/T is a miniature 10/100/1000BASE-T UTP copper to 1000BASE-X fiber media converter that supports jumbo frames up to 10,240 bytes.

The miConverter GX/T provides cost-effective fiber connectivity from Ethernet switches to diagnostic equipment, desktop and laptop computers.

 

miConverter_GX-T.pdf
PDF-Dokument [591.6 KB]

miConverter S/GXT and S/GXT+ Gigabit fiber to 10/100/1000BASE-T

The miConverter GX/T is a miniature 10/100/1000BASE-T copper to 1000BASE-X fiber media converter that supports jumbo frames.

The miConverter GX/T miniature Ethernet media converters provide cost-effective copper-to-fiber connectivity solutions. Due to their size, portability, and low power consumption, they are ideal for fiber-to-the-desktop/laptop under the desk deployments and mission-critical field diagnostic applications.

The miConverter GX/T features fixed fiber connectors and Small Form Pluggable (SFP) transceivers. ST, SC and LC fixed fiber connectors support multimode, single-mode, and single-mode single-fiber. 100BASE-X and 1000BASE-X SFP transceivers enable adaptability to different data rates, fiber types and wavelengths, including Coarse Wave Division Multiplexing (CWDM) wavelengths to increase the bandwidth capacity of fiber infrastructure.

 

miConverter_S-GXT.pdf
PDF-Dokument [998.6 KB]

miConverter Gx

1000BaseT UTP to 1000Base-X Fiber Ethernet

 

The miConverter Gx is a miniature 1000BASE-T UTP copper to 1000BASE-X fiber Gigabit Ethernet media converter. The miConverter Gx provides cost-effective fiber connectivity from Gigabit switches to diagnostic equipment, desktop and laptop computers.

 

miConverter_Gx.pdf
PDF-Dokument [573.5 KB]

miConverter GX/T PoE/D is a rate-switching 10/100/1000 RJ-45

The miniature miConverter GX/T PoE/D is a rate-switching 10/100/1000 RJ-45 copper to 100/1000BASE-X fiber media converter that can be powered with Power over Ethernet (PoE) when connected to PoE switches and midspans.

 

It can also be powered with DC power or AC power with an external power adapter. The miConverter GX/T PoE/D miniature Ethernet media converters provide cost-effective copper-to-fiber connectivity solutions. Due to their size, portability, and low power consumption, they are ideal for fiber-to-the-desktop/laptop under the desk deployments and mission-critical field diagnostic applications.

 

miConverter_GXT_PoE-D.pdf
PDF-Dokument [936.1 KB]

miConverter S/FXT Fast Ethernet fiber to 10/100/1000BASE-T

The miConverter S/FXT Fast Ethernet fiber to 10/100/1000BASE-T media converters are ideal for mobile applications where light weight, compact size and low power are critical requirements. 

Weighing less than 2.5 oz. (72 grams), and about the length of a standard house key, the miConverter S-Series converters can conveniently slip into any pocket or laptop carrying case for easy portability.

These ultra-compact media converters can be USB powered, enabling fiber connectivity to locations where AC or DC power is unavailable, such as field-deployed fiber-to-the-laptop and military applications. Fiber is run directly to the laptop, where it is converted to copper UTP and connected to a laptop RJ-45 port with a standard Ethernet patch cable. Power is supplied to the media converter by the laptop’s USB port using a standard USB cable, eliminating the need for an electrical outlet. 

 

miConverter_S-FXT.pdf
PDF-Dokument [596.2 KB]

miConverter 10/100 PoE/D

The miniature miConverter 10/100 PoE/D is a rate-switching 10/100 RJ-45 copper to 100BASE-X fiber media converter that can be powered with Power over Ethernet (PoE) when connected to PoE switches and midspans.

It can also be powered with DC power or AC power with an external power adapter. The miConverter 10/100 PoE/D miniature Ethernet media converters provide cost-effective copper-to-fiber connectivity solutions. Due to their size, portability, and low power consumption, they are ideal for fiber-to-the-desktop/ laptop under the desk deployments and mission-critical field diagnostic applications.

The miConverter 10/100 PoE/D features fixed fiber connectors and Small Form Pluggable (SFP) transceivers. ST, SC and LC fixed fiber connectors support multimode, single-mode, and single-mode single-fiber. 100BASE-X SFP transceivers enable adaptability to different fiber types and wavelengths, including Coarse Wave Division Multiplexing (CWDM) wavelengths to increase the bandwidth capacity of fiber infrastructure.

 

miConverter_10-100_PoE-D.pdf
PDF-Dokument [809.3 KB]

miConverter 10/100 PoE/D Industrial

The miniature miConverter 10/100 PoE/D is a rate-switching 10/100 RJ-45 copper to 100BASE-X fiber industrial media converter that can be powered with Power over Ethernet (PoE) when connected to PoE switches and midspans.

It can also be powered with DC power or AC power with an external power adapter. The miConverter 10/100 PoE/D miniature Ethernet media converters provide cost-effective copper-to-fiber connectivity solutions. Due to their size, portability, and low power consumption, they are ideal for fiber-to-the-desktop/laptop under the desk deployments and mission-critical field diagnostic applications.

The miConverter 10/100 PoE/D features fixed fiber connectors and Small Form Pluggable (SFP) transceivers. ST, SC and LC fixed fiber connectors support multimode, single-mode, and single-mode single-fiber. 100BASE-X SFP transceivers enable adaptability to different fiber types and wavelengths, including Coarse Wave Division Multiplexing (CWDM) wavelengths to increase the bandwidth capacity of fiber infrastructure.

 

miConverter 10/100 Plus

10/100Base-Tx UTP to 100Base-Fx Fiber Ethernet 

 

The miniature miConverter 10/100 and miConverter 10/100 Plus are rate-switching 10/100 UTP copper to 100BASE-FX fiber media converters. The miConverter provides cost-effective fiber connectivity from Ethernet switches to diagnostic equipment, desktop and laptop computers.

 

miConverter_10-100.pdf
PDF-Dokument [577.9 KB]

miConverter 10/100

10/100Base-Tx UTP to 100Base-Fx Fiber Ethernet

 

The miniature miConverter 10/100 and miConverter 10/100 Plus are rate-switching 10/100 UTP copper to 100BASE-FX fiber media converters. The miConverter provides cost-effective fiber connectivity from Ethernet switches to diagnostic equipment, desktop and laptop computers.

 

miConverter_10-100.pdf
PDF-Dokument [577.9 KB]

miConverter 18 Module Chassis

 

The miConverter 18-Module Power Chassis is a cost-effective mounting and powering solution for miConverter miniature media converters.

 

This compact chassis is ideal for consolidating multiple media converters into a highdensity, rack mountable form factor. It can be deployed in Service Provider, Enterprise and Government applications where fiber optic links are distributed from UTP switch equipment. The miConverter chassis is suitable for Fiberto- the-Desk, Campus LAN/WAN fiber networks and hybrid copper/fiber networks.

.

Druckversion | Sitemap
© © Lanopia GmbH