Network Management Module

The iConverter Network Management Module (NMM) is the heart of the iConverter management system. It supports SNMPv1, SNMPv2c, SNMPv3 and Telnet protocols, and features a 32-bit, high performance RISC microprocessor executing a real-time operating system. SMNPv3 provides secure access to devices by a combination of authenticating and encrypting packets over the network.

NetOutlook SNMP Management Software

NetOutlook is SNMP-based graphical element management software for Windows desktops. It provides real-time management, status monitoring and configuration control of one or multiple iConverter chassis and modules. NetOutlook provides secure, Carrier-Grade network management services for Metro Ethernet and Enterprise networks.

SFP to SFP, or 10/100/1000 UTP to 1000BASE-X, SFP, or redundant SFPs. Multi-service NID with end-to-end IEEE 802.3ah and 802.1ag performance monitoring

The iConverter GM3 is a flexible and cost-effective Network Interface Device (NID). The GM3 can operate as a Transport NID or as a Service NID to provide demarcation functions for in-franchise and out-of-franchise Ethernet service applications. 

10/100/1000 T UTP to 1000X Fiber VLAN Ethernet Media Converter and Network Interface Device with Integrated Management and Enhanced Features

The iConverter GX/TM2 conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The GX/TM2 provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service and enhanced Bandwidth Control (rate-limiting) capabilities. The GX/TM2 features built-in Operations, Administration and Maintenance (OAM) with comprehensive performance monitoring, fault detection and provisioning.

10/100/1000 T UTP to 1000X Fiber VLAN Ethernet Media Converter and Network Interface Device with Integrated Management

The iConverter GX/TM conforms to the Ethernet in the First Mile (EFM) standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The GX/TM provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service capabilities. The GX/TM features built-in Operations, Administration and Maintenance (OAM) management with comprehensive monitoring, fault detection and provisioning.

10/100T UTP to 100Fx Fiber VLAN Ethernet Media Converter and Network Interface Device with Integrated Management and Enhanced Features

The iConverter® 10/100M2 conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 10/100M2 provides intelligent, securely managed service demarcation at the customer premises, offering Layer 2 Control Protocol (L2CP) policy control, Quality of Service and enhanced Bandwidth Control (rate-limiting) capabilities. The 10/100M2 features built-in Operations, Administration and Maintenance (OAM) with comprehensive performance monitoring, fault detection and provisioning.

10/100T UTP to 100Fx Fiber VLAN Ethernet Media Converter and Network Interface Device with Integrated Management

The iConverter 10/100M conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 10/100M provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service and Bandwidth Control (rate-limiting) capabilities. The 10/100M features built-in Operations, Administration and Maintenance (OAM) with comprehensive performance monitoring, fault detection and provisioning.

1000X to 1000X Fiber VLAN Switch, Ethernet Fiber Converter and Network Interface Device with Integrated Management and Enhanced Features

The iConverter 2GXM2 conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 2GXM2 provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service and enhanced Bandwidth Control (ratelimiting) capabilities. The 2GXM2 features built-in Operations, Administration and Maintenance (OAM) with comprehensive performance monitoring, fault detection and provisioning.

1000X to 1000X Fiber VLAN Switch, Ethernet Fiber Converter and Network Interface Device with Integrated Management

The iConverter 2GXM conforms to the Ethernet in the First Mile (EFM) standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 2GXM provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service capabilities. The 2GXM features built-in Operations, Administration and Maintenance (OAM) with comprehensive performance monitoring, fault detection and provisioning.

100Base-Fx to 100Base-Fx Fiber VLAN Switch, Ethernet Fiber Converter and Network Interface Device with Integrated Management and Enhanced Features

The iConverter 2FXM2 conforms to the Ethernet in the First Mile (EFM) standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 2FXM2 provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service and Bandwidth Control (rate-limiting) capabilities. The 2FXM2 features built-in Operations, Administration and Maintenance (OAM) management with comprehensive monitoring, fault detection and provisioning.

100Base-Fx to 100Base-Fx Fiber VLAN Switch, Ethernet Fiber Converter and Network Interface Device with Integrated Management

The iConverter 2FXM conforms to the Ethernet in the First Mile (EFM) standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 2FXM provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service and Bandwidth Control (rate-limiting) capabilities. The 2FXM features built-in Operations, Administration and Maintenance (OAM) management with comprehensive monitoring, fault detection and provisioning.

4 and 8 Channel Optical Multiplexer/Demultiplexers

Omnitron’s iConverter CWDM/X Coarse Wave Division Multiplexing (CWDM) Multiplexer/Demultiplexer (MUX/DEMUX) modules support ITU-T G694.2 wavelengths between 1270nm to 1610nm in 20nm increments. iConverter CWDM/X modules are protocol and rate transparent allowing different services up to 10Gbps to be transported across the same fiber link.

4 and 8 Channel Single-Fiber Optical Multiplexer/Demultiplexers

iConverter Single-Fiber Course Wave Division Multiplexing (CWDM) modules provide a flexible and cost effective solution for increasing fiber capacity over single fiber networks. CWDM over single-fiber increases network bandwidth capacity by enabling multiple wavelengths, or data channels that carry independent services over existing fiber infrastructure. Up to sixteen separate wavelengths can be transported on a single-fiber link with iConverter Single-Fiber CWDM modules.

1 and 2 Channel Optical Add/Drop Multiplexers

iConverter CWDM/AD modules can be installed in any iConverter chassis equipped with other iConverter media converters and transponders to provide a multi-service platform capable of delivering Ethernet, TDM, SONET and other services across a CWDM fiber common link.

1 Channel Single-Fiber Optical Add/Drop Multiplexers

iConverter Single-Fiber Course Wave Division Multiplexing (CWDM) modules provide a flexible and cost effective solution for increasing fiber capacity over single fiber networks. CWDM over single-fiber increases network bandwidth capacity by enabling multiple wavelengths, or data channels that carry independent services over existing fiber infrastructure. Up to sixteen separate wavelengths can be transported on a single-fiber link with iConverter Single-Fiber CWDM modules.

Up to four T1/E1 UTP ports and one optional 10/100 Ethernet UTP port multiplexed over fiber

The iConverter 4xT1/E1 MUX multiplexes up to four T1/E1 copper circuits and one optional 10/100 Ethernet UTP port onto a fiber optic link. The aggregated services can be extended up to 120km across a fiber pair or up to 40km across a single fiber link.

10 Gigabit Protocol-Transparent Fiber Media Converter supporting any combination SFP+ or XFP transceivers

The iConverter XG is a 10 Gigabit, protocol-transparent media converter with two pluggable transceiver ports. The iConverter XG can be used as a copper-to-fiber converter, a fiber mode converter, a WDM transponder or a fiber repeater supporting the three Rs (regeneration, retiming and reshaping).

SFP to SFP Managed Protocol-Transparent Fiber Converter

The iConverter xFF is a protocol-transparent media converter that provides reliable and cost-effective conversion between different wavelengths, multimode and single-mode, and dual and single-fiber.

10/100/1000 T UTP to 1000X Fiber VLAN Ethernet Media Converter and Network Interface Device with Integrated Management and Enhanced Features

The iConverter GX/TM2 conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The GX/TM2 provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service and enhanced Bandwidth Control (rate-limiting) capabilities. The GX/TM2 features built-in Operations, Administration and Maintenance (OAM) with comprehensive performance monitoring, fault detection and provisioning.

10/100/1000 T UTP to 1000X Fiber VLAN Ethernet Media Converter and Network Interface Device with Integrated Management

The iConverter GX/TM conforms to the Ethernet in the First Mile (EFM) standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The GX/TM provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service capabilities. The GX/TM features built-in Operations, Administration and Maintenance (OAM) management with comprehensive monitoring, fault detection and provisioning.

10/100/1000 T UTP to 1000X Fiber VLAN Ethernet Media Converter

The iConverter GX/T media converters are members of the modular iConverter product family. The GX/T provides 10/100/1000 UTP copper to GigE fiber conversion and can be used in a managed or unmanaged fashion.

1000Base-T UTP to 1000X Fiber Media Converter

The iConverter Gx managed media converters are members of the modular iConverter product family, and provide 1000BASE-T UTP to 1000BASE-X fiber conversion.

1000BASE-T to 1000BASE-SX/LX Managed Media Converter

The iConverter Gx AN Media Converter is a managed media converter that provides 1000BASE-T UTP to 1000BASE-X fiber conversion between Gigabit networking devices.

10/100 T UTP to 100Fx Fiber VLAN Ethernet Media Converter and Network Interface Device with Integrated Management and Enhanced Features

The iConverter® 10/100M2 conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 10/100M2 provides intelligent, securely managed service demarcation at the customer premises, offering Layer 2 Control Protocol (L2CP) policy control, Quality of Service and enhanced Bandwidth Control (rate-limiting) capabilities. The 10/100M2 features built-in Operations, Administration and Maintenance (OAM) with comprehensive performance monitoring, fault detection and provisioning.

10/100 T UTP to 100Fx Fiber VLAN Ethernet Media Converter and Network Interface Device with Integrated Management

The iConverter 10/100M conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 10/100M provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service and Bandwidth Control (rate-limiting) capabilities. The 10/100M features built-in Operations, Administration and Maintenance (OAM) with comprehensive performance monitoring, fault detection and provisioning.

10/100 T UTP to 100Fx Fiber VLAN Ethernet Media Converter

The iConverter 10/100VT managed media converters are members of the modular iConverter product family, and provide UTP to Fiber conversion as well as 10/100 UTP rate conversion.

10/100 T UTP to 100Fx Fiber Ethernet Media Converter

The iConverter 10/100 managed media converters are members of the modular iConverter product family, and provide 10BASE-T or 100BASE-TX to 100BASE-FX fiber conversion.

100Base-Tx UTP to 100Base-Fx Fiber Ethernet Media Converter

The iConverter 100Fx/Tx managed media converters are members of the modular iConverter product family, and provide 100BASE-TX UTP to 100BASE-FX fiber conversion.

10Base-T UTP to 10Base-FL Fiber Media Converters

The iConverter 10FL/T managed media converters are members of the modular iConverter product family, and provide 10BASE-T UTP to 10BASE-FL fiber conversion.

10 Gigabit Protocol-Transparent Fiber Media Converter supporting any combination SFP+ or XFP transceivers

The iConverter XG is a 10 Gigabit, protocol-transparent media converter with two pluggable transceiver ports. The iConverter XG can be used as a copper-to-fiber converter, a fiber mode converter, a WDM transponder or a fiber repeater supporting the three Rs (regeneration, retiming and reshaping).

SFP to SFP Managed Protocol-Transparent Fiber Converter

The iConverter xFF is a protocol-transparent media converter that provides reliable and cost-effective conversion between different wavelengths, multimode and single-mode, and dual and single-fiber.

1000X to 1000X Fiber VLAN Switch, Ethernet Fiber Converter and Network Interface Device with Integrated Management and Enhanced Features

The iConverter 2GXM2 conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 2GXM2 provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service and enhanced Bandwidth Control (ratelimiting) capabilities. The 2GXM2 features built-in Operations, Administration and Maintenance (OAM) with comprehensive performance monitoring, fault detection and provisioning.

1000X to 1000X Fiber VLAN Switch, Ethernet Fiber Converter and Network Interface Device with Integrated Management

The iConverter 2GXM conforms to the Ethernet in the First Mile (EFM) standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 2GXM provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service capabilities. The 2GXM features built-in Operations, Administration and Maintenance (OAM) with comprehensive performance monitoring, fault detection and provisioning.

1000X to 1000X Fiber VLAN Switch and Ethernet Fiber Converter

The iConverter GX/X managed two-port Gigabit Ethernet switch and media converter is a member of the modular iConverter product family. The GX/X provides single-mode to multimode fiber conversion for extending network distances up to 80km by connecting multimode fiber network devices over single-mode fiber cabling. The GX/X also functions as a repeater, regenerating and re-timing the fiber optic signal. Multiple GX/X can be cascaded to extend total network distances.

1000X to 100Fx Fiber VLAN Switch and Ethernet Fiber Converter

The iConverter GX/F managed media converter is a member of the modular iConverter product family. The GX/F provides single-mode to multimode fiber conversion and rate conversion between 1000BASE-X and 100BASE-FX.

1000X Ethernet Fiber Converter

The iConverter 1000FF managed media converter is a member of the modular iConverter product family. The 1000FF provides single-mode to multimode fiber conversion and is a cost-effective solution to extending network distances by connecting multimode fiber network devices over single-mode fiber cabling.

OC12/STM4 Fiber Converter

The iConverter OC12FF managed media converter is a member of the modular iConverter product family. The OC12FF provides multimode to single-mode fiber conversion and is a costeffective solution for extending network distances by connecting multimode fiber network devices over single-mode fiber cabling.

OC3/STM1 Fiber Converter

The iConverter OC3FF managed media converter is a member of the modular iConverter product family. The OC3FF provides multimode to single-mode fiber conversion and is a cost-effective solution for extending OC-3 network distances by connecting multimode fiber network devices over single-mode fiber cabling.

100Base-Fx to 100Base-Fx Fiber VLAN Switch, Ethernet Fiber Converter and Network Interface Device with Integrated Management and Enhanced Features

The iConverter 2FXM2 conforms to the Ethernet in the First Mile (EFM) standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 2FXM2 provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service and Bandwidth Control (rate-limiting) capabilities. The 2FXM2 features built-in Operations, Administration and Maintenance (OAM) management with comprehensive monitoring, fault detection and provisioning.

100Base-Fx to 100Base-Fx Fiber VLAN Switch, Ethernet Fiber Converter and Network Interface Device with Integrated Management

The iConverter 2FXM conforms to the Ethernet in the First Mile (EFM) standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 2FXM provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service and Bandwidth Control (rate-limiting) capabilities. The 2FXM features built-in Operations, Administration and Maintenance (OAM) management with comprehensive monitoring, fault detection and provisioning.

100Base-Fx to 100Base-Fx Fiber VLAN Switch and Ethernet Fiber Converter

The iConverter 2Fx managed media converter is a member of the modular iConverter product family. The 2Fx provides a cost effective solution for extending network distances by connecting multimode fiber network devices over single-mode fiber cabling. The iConverter 2Fx both regenerates and re-times the fiber optic signal, and multiple 2Fxs can be used to extend total network distances.

100Base-Fx Fiber Converters

The iConverter 100FF managed media converters are members of the modular iConverter product family. The 100FF provides single-mode to multimode fiber conversion and is a cost-effective solution to extending network distances by connecting multimode fiber network devices over single-mode fiber cabling.

10Base-T to 10Base-2 Ethernet Media Converter

The iConverter 10T/2 is a 10BASE-T to 10BASE-2 media converter that converts between twisted pair (UTP) and coax LANs and joins their collision domains. The iConverter 10T/2 facilitates the connection of a coax segment to a 10BASE-T hub. When using a pair of iConverter 10T/2 converters back to back, they can connect between two 10BASE-T hubs via coax.

T1/E1 RJ45/RJ48 or Coax to Fiber Converters

The iConverter T1/E1 media converter provides standard T1 (1.544Mbps) or E1 (2.048Mbps) copper to fiber conversion and can be used to extend the demarcation point between service provider and networking equipment. T1/E1 media converters operate in pairs, extending distances over fiber, which improves noise immunity, quality of service, intrusion protection and network security.

Up to four T1/E1 UTP ports and one optional 10/100 Ethernet UTP port multiplexed over fiber

The iConverter 4xT1/E1 MUX multiplexes up to four T1/E1 copper circuits and one optional 10/100 Ethernet UTP port onto a fiber optic link. The aggregated services can be extended up to 120km across a fiber pair or up to 40km across a single fiber link.

T3 (DS3)/E3 Media Converters

The iConverter T3/E3 media converter provides standard T3 (44.736Mbps) or E3 (34.368Mbps) coax to fiber conversion and can be used to connect to devices such as PBXs, multiplexers, routers and video servers via fiber. T3/E3 media converters operate in pairs, extending distances over fiber, which improves noise immunity, quality of service, intrusion protection and network security.

100Base-Tx UTP to Redundant 100Fx Fiber Media Converter

The iConverter Redundant Fast Ethernet modules are designed for use in networks that require fiber or copper link redundancy. With a link fault detection time of 100 microseconds, the Redundant iConverter modules provide the rapid response time required for mission-critical applications.

100Base-Tx UTP to Redundant 100Base-Tx UTP Ethernet Module 100Base-Tx UTP to Redundant 100Base-Tx UTP Ethernet Module

The iConverter Redundant Fast Ethernet modules are designed for use in networks that require fiber or copper link redundancy. With a link fault detection time of 100 microseconds, the Redundant iConverter modules provide the rapid response time required for mission-critical applications.

4-Port 10/100Base Tx Ethernet VLAN Switch

The iConverter 4Tx VT 10/100 managed Ethernet switch module is a member of the iConverter product family. It provides a compact 4-Port 10/100 Ethernet switch that is expandable across the iConverter 19-Module, 5-Module and 2-Module chassis backplanes, as well as being supported as a stand-alone switch with the iConverter 1-Module Chassis.

4-Port 10/100BaseTx Ethernet Switch

The iConverter 4Tx 10/100 Ethernet Switch module is a member of the managed iConverter product family. The 4Tx provides a compact 4-Port 10/100 Ethernet switch that is expandable across the iConverter 19-Module, 5-Module and 2-Module chassis backplanes, as well as being supported as a standalone switch with the iConverter 1-Module Chassis.

Serial RS-232 to Fiber Media Converter

The Omnitron iConverter RS232 is a managed serial RS-232 to fiber converter that transmits serial protocol over fiber media. Fiber transmission extends the serial signals up to 120km, and is immune from electrical and magnetic interference.

Serial RS-422 and RS-485 to Fiber Media Converter

The Omnitron iConverter RS422/485 is a managed serial RS-422 and RS-485 to fiber converter that transmits serial protocol over fiber media. Fiber transmission extends serial signals up to 120km, and is immune from electrical and magnetic interference.

X.21 Serial to Fiber Media Converter

The iConverter X21 serial-to-fiber media converter supports X.21 and RS-530 applications featuring several configuration modes to enable connections with a wide variety of X.21 and RS-530 devices.

The 2U (3.5 inch) high iConverter 19-Module Chassis has triple-redundant power supplies and can be mounted in a 19-inch or 23-inch rack. It is designed for Enterprise Local Area Network (LAN) and Metropolitan Area Network (MAN) applications where fault tolerance and a high-density rack footprint are essential.

The 1U (1.75 inch) high iConverter 5-Module Chassis has redundant power supplies and can be mounted in a 19-inch or 23-inch rack. It is designed for Enterprise Local Area Network (LAN) and Metropolitan Area Network (MAN) applications where fault tolerance and reliability are essential.

The iConverter 2-Module Power Chassis is a compact, versatile chassis featuring a single internal universal AC or 18-60VDC power supply. The chassis provides housing for all iConverter media converters and switch modules.

The 1 inch high 1-Module iConverter Power Chassis supports a single iConverter module and is powered by an external AC power adapter. The 1-Module Power Chassis is designed for network edge or Customer Premises deployments where compact size, low cost and flexible upgrades are important.

The iConverter 1-Module Redundant Power Chassis is ideal for mission-critical Customer Premises (CP) Ethernet services, and in applications where the monitoring of external events is required.